Niko

This long claw is intended for use in combination with switches and socket outlets with claws.Long claws for mounting flush-mounting switches and socket outlets in flush-mounting boxes which are sunk too deeply in the wall. First, the existing claws of the switch or or socket outlet are easily pushed out of the switch or socket outlet. Then, the..

Universal modular dimmer PLC interference suppression, 5 - 350 W. This modular dimmer functions as both a phase control dimmer and as a reverse phase control dimmer. The choice of lamp type occurs via settings on the module. In addition, the lamp-specific minimum dimming level can also be adjusted. The dimmer is equipped with automatic de..

This smart USB-A / USB-C charger charges one or two mobile devices, such as mobile telephones, tablets, cameras, MP3 players and navigational devices. The devices must be suitable for charging via a USB-A / USB-C port. Your browser does not support the video tag. Dual smart USB-A / USB-C charger, claw fixing. Each connector block is equ..

This surface-mounting box is suitable for flush-mounting one function. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments...

This surface-mounting box is suitable for flush-mounting one function. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments...

This surface-mounting box is suitable for flush-mounting one function. The entire unit is splashproof which makes it extremely well-suited for use in damp areas and in demanding environments...

Finishing set for push button dimmer. To dismount simply pull the central plate off the mechanism...

Mechanism for a socket outlet with pin earthing, claw fixing and safety shutters. This socket outlet has a flush-mounting depth of 21 mm. A finishing set and flush surround plate in the colour of your choice must be ordered separately.Base for socket outlet with pin earthing and safety shutters, flush-mounting depth 21 mm, 16 A/250 Vac, screw termi..

Base for a universal rotary dimmer with powerline communication interference suppression, 2 wired, with a capacity of 3 to 300 W. A finishing set XXX-31003 and flush surround plate in a colour of your choice should be ordered separately.Base for universal rotary dimmer with PLC interference suppression 3 - 300 W, 2 wire. Universal flush-mounting di..

Finishing set for USB charger with two USB-A outputs. Finishing set for dual USB-A charger. The finishing set is clicked onto the base of the USB charger with two snap hooks. The finishing set has two symmetrical openings for connection of a USB cable to the USB charger. To dismount simply pull the central plate off the mechanism...

Central plate with single speaker input. Finishing set for single speaker connection. The central plate is clicked onto the base of the single speaker connection. The central plate has two openings: one for the red connection terminal and one for the black connection terminal. To dismount simply pull the central plate off the mechanism...

Central blind plate.This flat blank flush surround plate is used for standby wiring and can be clicked directly into a 45 x 45 mm flush-mounting frame, a trunking system with a cover, height 45 x 45 mm, or in an empty Mini-Patch distribution board with a 45 x 45 mm opening. The flush surround plate must always be mounted with the ‘TOP arrow’ (indel..

This surface mounting kit is used for surface mounting flush mounting functions. The box is mounted directly to the wall and is suitable for the surface-mounting of all types of flush mounting devices, except for time switches, 110° motion detectors and socket outlets with overvoltage protection...

Central plate with rotary key for the control of motors. The rotary key allows control of a motor at 3 speeds. To control ventilation, for example.Finishing set 1-2-3 for rotary switch for motors. The central plate is clicked onto the rotary switch. The setting key slides over the control axis of the mechanism. The middle of the central plate is in..

Single flush surround plate from the range Original. Finishing colour flush surround plate: Original LIGHT GREY.Single flush surround plate Original LIGHT GREY. Single flush surround plate for one mechanism. The complete flush surround plate is self-extinguishing (complies with a filament test of 650°C) and halogen-free. It is made of dimensionally..

These surface-mounting boxes are suitable for all flush-mounting devices from the Niko Original series (except for the time switches). They are mounted directly on the wall (screws supplied).Double boxes should be fitted with finishing plates with a center distance of 71mm (vertically and horizontally)...

Mechanism for a two-pole switch, a two-pole control switch or a two-pole pull switch, with claw fixing. With a two-pole switch, you can switch a lamp or several lamps connected in parallel on and off. A finishing set and flush surround plate in the colour of your choice must be ordered separately.Base for a two-pole switch, two-pole control switch ..

Mechanism for a double two-way switch, with claw fixing. Two-way switches are used to operate one lamp from two different locations. A finishing set and flush surround plate in the colour of your choice must be ordered separately.Base for a double two-way switch, 10 AX/250 Vac, screw terminals. The switch is equipped with block-shaped, silver conta..

Mechanism for a N.O. or N.G. push button with 4 connection terminals, with claw fixing. A finishing set and flush surround plate in the colour of your choice must be ordered separately.N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, screw terminals. The push button is equipped with block-shaped, silver contacts (cadmium-free) in..

Mechanism for a push button to control your roller blinds, with claw fixing. This roller blind push button is electrically separated. A finishing set and flush surround plate in the colour of your choice must be ordered separately.Base for roll-down shutter push button, electrically separated, 10 A/250 Vac, screw terminals. The push button is equip..

This lighting unit is equipped with a wire connection, 12V, and a white LED and is used for illuminating switches and push buttons. This lighting unit can also be used in trunking systems. The LED lighting unit is clicked into the lower-back of the base. Depending on the choice of switch, one lighting unit must be clicked into the left recess or tw..