Eltako

impulse group switch for central control, 1+1 NO contacts not potential free 16A/250V AC, for 1 motor or motor relays standby loss 0.05–0.4 watt only modular device for DIN 60715 TH35 rail mounting - 1 module = 18mm wide, 58mm deepThis impulse group switch serves to implement commands generated by the sensor relays or by switches and push-buttons..

for the simultaneous switching of 2 motorsimpulse group switch for central control, 2+2 NO contacts not potential free 5 A/250 V AC, for two 230 V-motorsstandby loss 0.05–0.9 watt only modular device for DIN 60715 TH35 rail mounting - 2 modules = 36 mm wide, 58 mm deepSwitching voltage max 250VAC at terminal L (N).Supply voltage 8..230 V UC at te..

Maximum current 32 A. Standby loss 0.5 watt only. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18 mm wide and 58 mm deep. Accuracy class B (1%). With S0 interface. It measures active energy by means of the current between input and output. The internal power consumption of 0.5 watt active power is neither metered nor indicated..

To connect this energy meter, the presence of a neutral conductor is mandatory. Maximum current 3x80 A. Standby loss 0.5 watt per path only. Modular device for DIN-EN 60715 TH35 rail mounting. 4 modules = 70 mm wide and 58 mm deep. Accuracy class B (1%). With S0 interface. It measures active energy by means of the current between input and outpu..

Single phase energy meter 32A - MID approved.Maximum current 32 A. Standby loss 0.4 watt only. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18 mm wide and 58 mm deep. Accuracy class B (1%). With S0 interface. This single-phase energy meter measures active energy by means of the current between input and output. The inte..

Universal dimmer for R, L and C loads, up to 400W, depending on the degree of ventilation, dimmable energy saving lamps (ESL) up to 100W, LED 230V lighting up to 100W. Automatic recognition of the type of load R + L or R + C, LED and ESL manually adjustable. With central control (all ON / all OFF)...

Three phase energy meter 80A - MID approved.To connect this energy meter, the presence of a neutral conductor is mandatory. Maximum current 3x80 A. Standby loss 0.5 watt per path only. Modular device for DIN-EN 60715 TH35 rail mounting. 4 modules = 70 mm wide and 58 mm deep. Accuracy class B (1%). With S0 interface. It measures active energy by ..

Universal control voltage 8-253VAC / 10-230VDC2 NO contacts potential free 16 A/250 V AC incandescent lamp load up to 2000 Wfluorescent lamps with conventional ballast or non compensated: 1000VAfluorescent lamps with electronic ballast or compensated: 500VAenergy saving lamps or fluorescent lamps with electronic ballast: inrush current <70A 10ms..

Universal control voltage 8-253VAC / 10-230VDC2 NO contacts potential free 16 A/250 V ACIncandescent lamp load up to 2000 Wfluorescent lamps with conventional ballast or non compensated: 1000VAfluorescent lamps with electronic ballast or compensated: 500VAenergy saving lamps or fluorescent lamps with electronic ballast: inrush current <70A 10msL..

Universal control voltage 8-253VAC / 10-230VDC2 NO contacts potential free 16 A/250 V ACIncandescent lamp load up to 2000 Wfluorescent lamps with conventional ballast or non compensated: 1000VAfluorescent lamps with electronic ballast or compensated: 500VAenergy saving lamps or fluorescent lamps with electronic ballast: inrush current <70A 10msL..

Universal control voltage 8-253VAC / 10-230VDC1+1 NO contacts potential free 16 A/250 V ACcan be used as 1 two-pole circuit (2NO) or as 2 individual one-pole circuits (1NO+1NO)use as switching relay or as an impulse switchIncandescent lamp load up to 2000 Wfluorescent lamps with conventional ballast or non compensated: 1000VAfluorescent lamps with ..

Universal control voltage 8-253VAC / 10-230VDCWith 4 independent contacts, 1NO contact each potential free 16 A/250 V AC Can be used as 4 individual one-pole circuits (1NO+1NO+1NO+1NO)Use as switching relay or as an impulse switchIncandescent lamp load up to 2000 Wfluorescent lamps with conventional ballast or non compensated: 1000VAfluorescent l..